Dimension Nylon Basic Toe Straps -Durable metal buckle -Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution must be used to keep the strap tail out of the wheel)
Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes.
Dimension Toe Straps. - Durable metal buckle - Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution: must be used to keep the strap tail out of the wheel) - 440mm length
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms. - Includes 10 washers
IGUS Bushing replacements for your Spike or Oozy pedals help to eliminate any play that develops over time, and revive smooth spinning action. - 2pcs IGUS self lubricating bushing - 2pcs O-ring - 2pcs stainless shim washer
RaceFace Chester Pedal Pin Kit 20 Pins Black
$16.80 - $17.40
- Tough, nylon toe clips with heavy-duty woven straps - Includes mounting hardware
- Strapless design is easy to engage without fully committing to the pedal - No special shoes required - Improves pedaling efficiency - Molded from unbreakable nylon - Please make sure your pedals have visible mounting points or a removable reflector for mounting prior to purchase - Includes mounting hardware. Note: metal plate may not be required during installation.
Shimano's SM-SH56 Multi-Release Cleats disengage with less effort and in more directions than standard SPD cleats.
The Speedplay Cleat Fastening Screw Torque Wrench provides the proper torque of 2.5Nm / 22 in-lbs. required when installing the 4mm Cleat Fastening Screws (8) used with all Speedplay road cleats. Includes a removable #2 Philips bit.
The Keo Cover protects your cleats while walking. They are compatible with all Keo Grip cleats and Keo Cleats. – Cleats protection – Anti-slip – Compatible with all cleats
Replacement pin set for Race Face Atlas and Aeffect pedals.
- Replacement wearplate sets include 2 right and 2 left plates, enough for one set of pedals - Service parts for 1st generation LG1 pedals only
Replacement cleat covers for Ultra Light Action Walkable cleats.
Add protection and functionality to your Zero Aero pedals with these Zero Aero Walkable Cleat covers. These will make hopping off and enjoying a coffee just as easy and fun as beasting it up on the group ride, maybe even easier!
Shimano's SPD cleats are perfect for all your SPD-compatible pedals. If your entry and exit isn't what it used to be, a cleat replacement is just what the bike doctor ordered.
Replacement pedal pins for Chromag pedals. Includes 40 pins.
- Compatible with all Spike & Oozy Pedals - Full Complement Sealed Bearing x 2pcs - Green Silicone Friction Seals - Replacement inboard bearings for your SPIKE or OOZY pedals.
Everything you need to keep those Crank Bros pedals spinning freely is found in their Pedal Rebuild Kit. Each kit includes parts and instruction to rebuild one pair of Crank Bros. pedals.
Your pedals like to be pampered. The Crank Brothers Pedal Refresh Kit gives you everything you need to keep them happy. Pedal Refresh Kit includes: - enduro catridge bearings - igus LL-glide bearings - double seal system (internal and external seals) - hex alloy end caps - o-rings - nuts - sleeve bushings - bearing removal tool Compatible with the following pedals (2010-present): - Eggbeaters - Candys - Mallets - 5050s
Look's replacement cleats for their classic Keo pedals are made of polyamide nylon with Teflon toe and heel inserts for easy entry/exit, efficient pedaling, and long-lasting durability. Molded wear indicators tell you when it's appropriate to replace your cleats. These cleats are available with three different amounts of float: 4.5-degrees (gray), 9-degrees (red), and fixed float (black).
• Includes a pair of cleats and mounting hardware • Compatible with Ritchey Pro-V4 and V5 mountain clipless pedals
- NJS/Keirin certified chrome plated steel clips for single toe strap - Hardware included
- Compatible with all Shimano SPD type pedals - 4 degrees of float - Sold in pairs with hardware - Compatible with Multisport 4 pedal
- Chrome plated steel clips for double toe strap - Hardware included - Deep size for shoes with a larger toe-Box
Authentic Ritchey replacement cleats for WCS Micro Road Pedals. Note: only Ritchey replacement cleats work with the Micro pedal. - Beveled cleat compatible with Ritchey WCS Micro pedals - Compatible with SPD style pedals
45NRTH's Replacement Pedal Pins are a great way to customize the style and grip of your 45NRTH pedals (sold separately). These tough, aluminum pins deliver fantastic bite into traditional winter boots, and come in a variety of colors to coordinate with your rig. Plus, the included wrench keeps the job quick.
Xpedo cleat set for Xpedo M-Force pedals - Weight: 65g per set with hardware
$28.73 - $31.60
- Genuine leather-wrapped chrome plated steel - Hardware included
The ATAC cleats are developed for the TIME mountain bike pedal range (MX and XC range). By switching right and left cleats, you can choose two options for the release angle: 13-degrees or 17-degrees. - Weight: 45g/pair
Page 1 of 2 Next page