Lezyne's Go-Pro LED Adapter allows you to mount your Lezyne LED light to any standard Go-Pro mount. This makes it fast and easy to switch swap out your camera and headlight using the same mount.
• Fits all 2015 Serfas taillights • Bolts to rack for easy removal of taillight
Lezyne's LED Handle Bar Mount Adapter is a composite matrix adapter to replace the rubber strap that ships on 2016 and later models of Macro XL, Power XL, Super XXL, and Deca XXL lights, so that they can be used with the Aluminum Handlebar Mount, the Composite Handlebar Mount, Aluminum Helmet Mount, or Composite Handlebar Mount.
- Attaches to rear racks - Compatible with: Blinky 3,5,7 and Superflash - 25mm between each of the top horizontal holes (center to center) - Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack
This mount is designed to securely attach your Light and Motion Seca, Vega, or Stella headlight (sold separately) to your helmet. With a helmet mount, the light is always pointing where you're looking.
Light & Motion's Vis 180 Aero Post Pad lets you easily attach your Vis 180 taillight to the back of your aero seatpost so you can be fast and visible.
The NiteRider Lumina Handlebar Strap Mount offers a wide variety of handlebar size fitments and remains rock solid while riding through rough terrain. It’s easy to install and, like all NiteRider mounts, features a quick release tab for when it’s time to recharge or leave your bike unattended. System Compatibility: - Lumina Series - Mako Series - MiNewt Cordless Series
- Compatible with Blinky 3,5,7, Superflashes, Turbo, Turbo Minis Superflash Micros and Blinky Safety rear light - Designed specifically for aero seat posts - Adjustable light angle - Easy on/easy off design makes for quick mounting and removal
- Mounts most AA flashlights to handlebars and helmets - Ideal low-cost lighting alternative for cyclists
Lezyne's Composite Bar Mount is a hard mount made of a reinforced Composite Matrix cradle for a strong and secure attachment of the Mega Drive, Deca Drive, and XL LED lights to the handlebar. It is designed for 25.4 mm or 31.8 mm bars, with the cradle designed to pivot 15 degrees laterally to allow adjustment of the LED light beam angle and directing it where it is most needed. A large thumb screw secures the CM mount to the bar without need of tools, and can be tightened by hand or a 1mm hex key. Molded rubber shims add grip and fine-tune fitting to undersized bars. Composite Bar Mounts are sold in a kit with the Mega Drive, Deca Drive, or XL LED lights.
Setup your Light & Motion Urban or Deckhand light (sold separately) wherever you can connect a GoPro mount. Use this adapter to connect your Urban or Deckhand to any GoPro mounting option.
Increase your line of sight with the NiteRider Lumina Helmet Mount. By mounting your head light onto your helmet, it’ll allow you to see farther into your turn or wherever your head turns. System Compatibility: - Lumina Series - MiNewt Mini Series - Mako Series
Replacement lithium ion CR2032 batteries for use in the Femto LED lights. SPEC: 700 mAh, 3.6V.
Planet Bike's BRT Strap is a small item that provides big visibility. This versatile LED safety band can be used as an arm band, pants keeper, dog collar and anything else you can think of. An included lithium battery provides over 200 hours of run time in either flashing or steady mode.
The ultimate mounting solution for the Vibe Pro Taillight. Securely mount Vibe to seat rails placing rear lighting at the highest part of the bike - optimum for visibility to motorists. Innovative design allows the Vibe to be adjusted in multiple angles for ideal placement. Additionally this mount solves common mounting issues when using an aero post, trunk bag, etc. Features - Higher mounting point increases rear visibility - Innovative twist-lock system ensures Vya will lock into mount and not vibrate free - Optimized for the Vya Pro Taillight for a sleek mounting orientation. The standard Vya Taillight is compatible but may interfere with accessories such as a seat bag
The NiteRider Lumina Stick-On Mount is ideal for non-vented helmet mounting applications. Mount it to your favorite downhill/MX style helmet, or explore the versatility of your Lumina headlight by mounting it onto an industrial hard hat. System Compatibility: - Lumina Series - MiNewt Mini Series - Mako Series
Pro Series Low Profile Helmet Strap Mount (Single Beam Headlight). System Compatibility: - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems
$38.28 - $38.62
- The Gino Light Mount is a small perch that allows lights to be mounted to any M5 threaded eyelet, rack mount or braze-on - Made in USA
Handlebar mount for all systems that use the slider mounting clip. Fits handlebar clamp diameters from 25.4mm–35mm. System Compatibility: - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems
Page 1 of 1